Stable Aisle is an impregnation for concrete stable floors and is designed for stable aisles and tying areas. In many stables, the raw concrete is almost always left exposed. Untreated concrete is a porous surface that releases dust with every friction. By applying Stable Aisle, you save time behind the broom and get a dust-free stable floor.

The product penetrates deeply into the substrate and binds the dust, preventing dust particles from being drawn up from the concrete and swirling around in the air when you, for example, sweep your stable aisle. In addition to its dust-reducing properties, Stable Aisle also extends the lifespan of your stable floor and is somewhat stain-resistant. You will also find that the floor becomes easier to keep clean and the air quality in the stable will improve. Stable Aisle is made in Sweden and is both user-friendly and environmentally friendly.

Contents
Aqua, Potassium silicate, Trideceth-X, Aminomethyl propanol.

Storage
Store dry and cool, well-sealed, out of reach of children.

Usage

Examples where Stable Aisle can be applied:

• Stable aisles, wash stalls, and tying areas
• Veterinary clinics
• Mineral substrates, such as concrete, cement, and brick.

The product is easy to apply. The idea is to be able to complete the treatment in a couple of hours while the horses are, for example, in the paddock. The floor needs to have a temperature of at least 10 °C during application.

1. Clean the substrate by sweeping, rinsing, or vacuuming. Surfaces to be coated should be clean and dry during application.

2. Use a pressure sprayer and spray the product over the floor, then spread the product evenly with a short-haired cleaning tool (micro mop or similar), or alternatively a soft broom.

3. Drying time approximately 1–4 hours depending on temperature and ventilation in the stable.

Material consumption: 0.1 liter/m². 5 liters are sufficient for about 50m².